Doosan DL250TC
Browse All Doosan or Integrated Tool Carrier Models
Contents:
Dimensions
| Length W/ Bucket On Ground | 26.24 ft in (7995 mm) |
| Width Over Tires | 8.56 ft in (2608 mm) |
| Height To Top Of Cab | 10.7 ft in (3260 mm) |
| Wheelbase | 9.91 ft in (3020 m) |
| Ground Clearance | 1.35 ft in (410 mm) |
| Dump Clearance At Max Lift | 8.86 ft in (2700 mm) |
| Max Lift Height | 12.22 ft in (3722 mm) |
| Reach At Max Height And Dump | 4.37 ft in (1330 mm) |
| Length With Out Forks On Ground | 27.67 ft in (8431 mm) |
Engine
| Engine Make | 2252 |
| Engine Model | DL06 |
| Gross Power | 162 hp (120.9 kw) |
| Net Power | 153 hp (114.1 kw) |
| Max Torque | 593 lb ft (804 Nm) |
| Displacement | 360 cu in (5.9 L) |
| Aspiration | turbo compressor and air-air cooling |
Operational
| Operating Weight | 31085 lb (14100 kg) |
| Fuel Capacity | 67.4 gal (255 L) |
| Cooling System Fluid Capacity | 11.9 gal (45 L) |
| Engine Oil Capacity | 7.2 gal (27 L) |
| Transmission Fluid Capacity | 11.9 gal (45 L) |
| Front Diff Fluid Capacity | 8.2 gal (31 L) |
| Rear Diff Fluid Capacity | 6.4 gal (24 L) |
| Hydraulic System Fluid Capacity | 41.8 gal (158 L) |
| Turning Radius | 18 ft in (5477 mm) |
| Operating Voltage | 24 V |
| Rear Axle Oscillation | 11 degrees |
| Static Tipping Load - Bucket | 21623 lb (9808.1 kg) |
| Static Tipping Load - Forks | 19996 lb (9070.1 kg) |
| Tire Size | 20.5R25 |
Transmission
| Transmission Type | powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed Forward | 21.2 mph (34 km/h) |
| Max Speed Reverse | 14.7 mph (23.5 km/h) |
Hydraulic System
| Pump Type | triple section vane pump |
| Relief Valve Setting | 2842.8 psi (19600 kPa) |
| Raise Time | 5.4 sec |
| Dump Time | 1.3 sec |
| Lower Time | 3.3 sec |
Bucket
| Breakout Force | 28660 lb (127.5 kN) |
| Bucket Capacity - Struck | 3.3 yd3 (2.5 m3) |
