JCB 411ZX Zet
Browse All JCB or Integrated Tool Carrier Models
Contents:
Dimensions
| Length W/ Bucket On Ground | 18.15 ft in (5530 mm) |
| Width Over Tires | 7.39 ft in (2250 mm) |
| Height To Top Of Cab | 9.42 ft in (2870 mm) |
| Wheelbase | 7.39 ft in (2250 m) |
| Ground Clearance | 1.42 ft in (430 mm) |
| Hinge Pin Max Height | 11.54 ft in (3516 mm) |
| Dump Clearance At Max Lift | 9.11 ft in (2775 mm) |
| Max Lift Height | 10.92 ft in (3328 mm) |
| Fork Tine Length | 3.94 ft in (1200 mm) |
| Reach At Max Height And Dump | 2.32 ft in (705 mm) |
Engine
| Engine Make | 2257 |
| Engine Model | 1104C-44 |
| Gross Power | 75 hp (56 kw) |
| Net Power | 67 hp (50 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 223 lb ft (302.4 Nm) |
| Torque Measured @ | 1400 rpm |
| Displacement | 268.5 cu in (4.4 L) |
| Aspiration | Natural aspirated |
Operational
| Operating Weight | 16799.3 lb (7620 kg) |
| Fuel Capacity | 29.1 gal (110 L) |
| Cooling System Fluid Capacity | 4.8 gal (18 L) |
| Engine Oil Capacity | 2.9 gal (10.7 L) |
| Transmission Fluid Capacity | 34.4 gal (130 L) |
| Front Diff Fluid Capacity | 4.3 gal (16 L) |
| Rear Diff Fluid Capacity | 4.8 gal (18 L) |
| Hydraulic System Fluid Capacity | 34.4 gal (130 L) |
| Turning Radius | 15 ft in (4550 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 65 amps |
| Rear Axle Oscillation | 9 degrees |
| Static Tipping Load - Bucket | 11464.1 lb (5200 kg) |
| Static Tipping Load - Forks | 7826.5 lb (3550 kg) |
| Tire Size | 405/80 R25 |
Transmission
| Transmission Type | Hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed Forward | 12.5 mph (20 km/h) |
| Max Speed Reverse | 12.5 mph (20 km/h) |
Hydraulic System
| Pump Type | Gear |
| Relief Valve Setting | 3553 psi (24497.1 kPa) |
| Pump Flow Capacity | 23.8 gal/min (90 L/min) |
| Raise Time | 4.9 sec |
| Dump Time | 0.9 sec |
| Lower Time | 3.1 sec |
Bucket
| Bucket Capacity - Heaped | 1.6 yd3 (1.2 m3) |
| Bucket Capacity - Struck | 1.4 yd3 (1.1 m3) |
