JCB 426HTM
Browse All JCB or Integrated Tool Carrier Models
Contents:
Dimensions
| Width Over Tires | 8.37 ft in (2550 mm) |
| Dump Clearance At Max Lift | 9.29 ft in (2831 mm) |
| Max Lift Height | 12.2 ft in (3718 mm) |
| Fork Tine Length | 4.01 ft in (1220 mm) |
| Reach At Max Height And Dump | 3.55 ft in (1081 mm) |
Engine
| Engine Make | 2347 |
| Engine Model | BTAA5.9C |
| Gross Power | 152 hp (113.4 kw) |
| Net Power | 150 hp (111.9 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 335.6 lb ft (455 Nm) |
| Torque Measured @ | 1600 rpm |
| Displacement | 360.1 cu in (5.9 L) |
| Aspiration | turbocharged |
Operational
| Fuel Capacity | 55.5 gal (210 L) |
| Cooling System Fluid Capacity | 9.3 gal (35 L) |
| Engine Oil Capacity | 3.7 gal (14 L) |
| Transmission Fluid Capacity | 8 gal (30 L) |
| Front Diff Fluid Capacity | 10.4 gal (39 L) |
| Rear Diff Fluid Capacity | 9.8 gal (37 L) |
| Hydraulic System Fluid Capacity | 55.5 gal (210 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 70 amps |
| Rear Axle Oscillation | 25 degrees |
| Static Tipping Load - Forks | 14771 lb (6700 kg) |
| Tire Size | 20.5-25 SGG L2 |
Transmission
| Transmission Type | smooth shift powershift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed Forward | 24 mph (38.5 km/h) |
| Max Speed Reverse | 15.1 mph (24.3 km/h) |
Hydraulic System
| Pump Type | twin variable displacement piston pumps |
| Relief Valve Setting | 3625 psi (24993.5 kPa) |
| Pump Flow Capacity | 108.4 gal/min (410 L/min) |
| Raise Time | 4.4 sec |
| Dump Time | 1 sec |
| Lower Time | 2.7 sec |
Bucket
| Breakout Force | 31023.7 lb (138 kN) |
| Bucket Capacity - Heaped | 2.4 yd3 (1.8 m3) |
| Bucket Capacity - Struck | 2.1 yd3 (1.6 m3) |
