Caterpillar 160M2 AWD
Browse All Caterpillar or Motor Grader Models
Contents:
Dimensions
| Overall Length | 29.2 ft in (8898 mm) |
| Width Over Tires | 8.47 ft in (2581 mm) |
| Wheelbase | 20.1 ft in (6126 mm) |
| Rear Ground Clearance | 1.13 ft in (344 mm) |
| Tandem Axle Wheelbase | 5 ft in (1523 mm) |
| Front Ground Clearance | 1.97 ft in (600 mm) |
| Blade Base | 8.39 ft in (2557 mm) |
| Height To Top Of Isomount Cab | 10.79 ft in (3287 mm) |
Ripper
| Pry-Out Force | 258201 lb (117118.1 kg) |
| Ripping Depth - Maximum | 16.8 in (426.8 mm) |
| Ripper Shank Holders | 5 |
| Penetration Force | 20443 lb (9272.8 kg) |
| Machine Length Increase, Beam Raised | 40.6 in (1031.3 mm) |
| Ripper Shank Holder Spacing | 21 in (533.4 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2236 |
| Engine Model | C9.3 ACERT VHP |
Frame
| Front Frame Structure - Height | 1.1 ft in (320.1 mm) |
| Front Frame Structure - Width | 0.9 ft in (254 mm) |
Engine
| Power Measured @ | 2100 rpm |
| Torque Measured @ | 2100 rpm |
| Net Power Gears 7-8 | 283 hp (211.1 kw) |
| Net Torque Gears 7-8 | 1000 lb ft (1355.9 Nm) |
| Bore | 4.5 in (114.3 mm) |
| Stroke | 5.9 in (149.9 mm) |
| Emissions | U.S. Tier 4 Interim/EU Stage IIIB |
| Engine Model | Cat C9.3 ACERT |
| Derating Altitude | 10000 ft in (3048 m) |
| Maximum Torque | 1000 lb ft (1355.9 Nm) |
| Base Power (1st Gear) - Net | 213 hp (158.9 kw) |
| Standard Capability | 109 degrees |
| Speed At Rated Power | 2,100 rpm |
| High - Ambient Capability | 122 degrees |
| Awd Range - Net | 166-211 kW (223-283 hp) |
| Base Power (1st Gear) - Net - Metric | 216 hp (161.1 kw) |
| Awd Range - Net - Metric | 166-211 kW (226-287 hp) |
| High Ambient - Fan Speed - Maximum | 1,550 rpm |
| High Ambient - Fan Speed - Standard | 1,400 rpm |
| High Ambient - Fan Speed - Minimum | 500 rpm |
| Vhp Plus Range - Net | 159-196 kW (213-263 hp) |
| Vhp Plus Range - Net - Metric | 159-196 kW (216-267 hp) |
Frame
| Circle - Diameter | 60.2 in (1529.1 mm) |
| Drawbar - Height | 6 in (152.4 mm) |
| Front Axle - Height To Center | 23.6 in (599.5 mm) |
| Circle - Blade Beam Thickness | 1.6 in (40.7 mm) |
| Front Axle - Total Oscillation Per Side | 32 degrees |
| Drawbar - Thickness | 0.5 in (12.7 mm) |
| Drawbar - Width | 3 in (76.2 mm) |
| Front-Top/Bottom Plate - Width | 12 in (304.8 mm) |
| Front-Top/Bottom Plate - Thickness | 0.9 in (22.1 mm) |
| Front Axle - Wheel Lean - Left/Right | 18 degrees |
Engine
| Vhp Plus - Gear 1f, Net | 213 hp (158.9 kw) |
| Vhp Plus - Gear 2f, Net | 223 hp (166.3 kw) |
| Vhp Plus - Gear 3f, Net | 233 hp (173.8 kw) |
| Vhp Plus - Gear 4f, Net | 243 hp (181.3 kw) |
| Vhp Plus - Gear 5f, Net | 248 hp (185 kw) |
| Vhp Plus - Gear 6f, Net | 253 hp (188.7 kw) |
| Vhp Plus - Gear 7f, Net | 258 hp (192.4 kw) |
| Vhp Plus - Gear 8f, Net | 263 hp (196.2 kw) |
| Base Power (All Gears) - Net | 213 hp (158.9 kw) |
Operational
| Std Operation Weight - Front Axle | 12798 lb (5805.1 kg) |
| Hydraulic System Fluid Capacity | 26.4 gal (100 L) |
| Std Operation Weight - Rear Axle | 32424 lb (14707.3 kg) |
| Std Operation Weight - Total | 45221 lb (20512 kg) |
| Max Operation Weight - Front Axle | 13343 lb (6052.3 kg) |
| Max Operation Weight - Rear Axle | 36444 lb (16530.8 kg) |
| Max Operation Weight - Total | 52795 lb (23947.5 kg) |
| Oil System Fluid Capacity | 7.9 gal (30 L) |
| Fuel Capacity | 110 gal (416.4 L) |
| Cooling System Fluid Capacity | 14.8 gal (56.1 L) |
| Transmission Fluid Capacity | 17.2 gal (65.2 L) |
| Circle Gearbox Fluid Capacity | 1.8 gal (6.9 L) |
| Tandem Case Fluid Capacity (Each) | 16.9 gal (64 L) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 150 amps |
Power Train
| Brakes - Parking | Multiple Oil Disc |
| Brakes - Service | Multiple Oil Disc |
| Transmission | Direct Drive Powershift |
| Forward/Reverse Gears | 8 Fwd/6 Rev |
| Brakes - Secondary | Dual Circuit Control |
| Brakes - Service - Surface Area | 3565 in2 (2.3 m2) |
Steering
| Articulation Angle | 20 degrees |
| Turning Radius | 25.5 ft in (7.8 m) |
Transmission
| Transmission Type | Direct Drive, Powershift |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 6 |
| Max Speed - Forward | 29 mph (46.7 km/h) |
| Max Speed - Reverse | 22.9 mph (36.9 km/h) |
Front Axle
| Wheel Lean | 18 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2 ft in (600 mm) |
Weights
| Operating Weight - Typically Equipped | 47249 lb (21431.8 kg) |
| Gross Vehicle Weight - Base - Total | 40979 lb (18587.8 kg) |
| Gross Vehicle Weight - Maximum - Total | 54869 lb (24888.2 kg) |
| Operating Weight - Typically Equipped - Total | 47249 lb (21431.8 kg) |
| Gross Vehicle Weight - Base - Rear Axle | 29849 lb (13539.3 kg) |
| Operating Weight - Typically Equipped - Front Axle | 14223 lb (6451.5 kg) |
| Operating Weight - Typically Equipped - Rear Axle | 33026 lb (14980.4 kg) |
| Gross Vehicle Weight - Base - Front Axle | 11130 lb (5048.5 kg) |
| Gross Vehicle Weight - Maximum - Front Axle | 17009 lb (7715.2 kg) |
| Gross Vehicle Weight - Maximum - Rear Axle | 37860 lb (17173.1 kg) |
Hydraulic System
| Standby Pressure | 609 psi |
| Maximum System Pressure | 3503 psi (24152.4 kPa) |
Moldboard
| Moldboard Width | 14 ft in (4267.2 mm) |
| Moldboard Height | 24 in (609.6 mm) |
| Moldboard Thickness | 0.9 in (22 mm) |
| Max Depth Of Cut | 29.6 in (750 mm) |
| Side Shift Left | 20.1 in (510 mm) |
| Side Shift Right | 26 in (660 mm) |
| Blade Pull At Max Weight | 20044 lb (9091.9 kg) |
| Blade Down Pressure | 22884 lb (10380.1 kg) |
Hydraulic System
| Pump Type | Variable Piston |
| Pump Flow | 55.5 gal/min (210.1 L/min) |
| Relief Valve Pressure | 3503 psi |
| Circuit Type | Parallel |
| Pump Output | 55.5 gal/min |
| Reservoir Tank Capacity | 15.9 gal (60.2 L) |
Moldboard
| Blade Width | 14 ft in (4.3 m) |
| Arc Radius | 16.3 in (414.1 mm) |
| Throat Clearance | 6.5 in (165.1 mm) |
| Cutting Edge Width | 6 in (152.4 mm) |
| Cutting Edge Thickness | 0.6 in (15.3 mm) |
| End Bit - Width | 6 in (152.4 mm) |
| End Bit - Thickness | 0.6 in (15.3 mm) |
| Moldboard - Height | 24 in (609.6 mm) |
| Moldboard - Thickness | 0.9 in (22.1 mm) |
| Blade Pull - Maximum Gvw | 34072 lb (15454.9 kg) |
| Blade Pull - Base Gvw | 25908 lb (11751.7 kg) |
| Blade Down Pressure - Base Gvw | 17171 lb (7788.7 kg) |
| Blade Down Pressure - Maximum Gvw | 29195 lb (13242.7 kg) |
Circle
| Diameter | 60.3 in (1530 mm) |
| Rotation | 360 degrees |
| Shift Left | 27.4 in (695 mm) |
| Shift Right | 28.7 in (728 mm) |
| Max Reach Outside Tires - Left | 82.3 in (2090 mm) |
| Max Reach Outside Tires - Right | 89.7 in (2278 mm) |
| Max Lift Above Ground | 17.8 in (452 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
Operating Specifications
| Top Speed - Forward | 29.5 mph (47.5 km/h) |
| Top Speed - Reverse | 23.3 mph (37.5 km/h) |
| Turning Radius - Outside Front Tires | 25 ft in (7.6 m) |
| Steering Range - Left/Right | 47.5 degrees |
| Articulation Angle - Left/Right | 20 degrees |
| Forward - 8th | 29.5 mph (47.5 km/h) |
| Forward - 7th | 20.3 mph (32.7 km/h) |
| Forward - 6th | 14.7 mph (23.7 km/h) |
| Forward - 5th | 10.8 mph (17.4 km/h) |
| Forward - 4th | 7 mph (11.3 km/h) |
| Forward - 3rd | 5.1 mph (8.3 km/h) |
| Forward - 2nd | 3.5 mph (5.7 km/h) |
| Forward - 1st | 2.6 mph (4.2 km/h) |
| Reverse - 6th | 23.3 mph (37.5 km/h) |
| Reverse - 5th | 16 mph (25.8 km/h) |
| Reverse - 4th | 8.5 mph (13.7 km/h) |
| Reverse - 3rd | 5.5 mph (8.9 km/h) |
| Reverse - 2nd | 3.8 mph (6.2 km/h) |
| Reverse - 1st | 2 mph (3.3 km/h) |
Standards
| Brakes | ISO 3450, ISO 10265 |
| Rops/Fops | ISO 3471/ISO 3499 |
| Sound | ISO 6394; ISO 6395 |
| Steering | ISO 5010 |
Service Refill
| Cooling System | 14.8 gal (56.1 L) |
| Hydraulic System - Total | 26.4 gal (100 L) |
| Engine Oil | 7.9 gal (30 L) |
| Hydraulic System - Tank | 16.9 gal (64 L) |
| Tandem Housing - Each | 16.9 gal (64 L) |
| Circle Drive Housing | 1.8 gal (6.9 L) |
| Front Wheel Spindle Bearing Housing | 0.2 gal (0.5 L) |
| Fuel Capacity | 110 gal (416.4 L) |
| Transmission - Differential - Final Drives | 17.2 gal (65.2 L) |
Blade Range
| Circle Centershift - Right | 28.7 in (729 mm) |
| Circle Centershift - Left | 27.4 in (696 mm) |
| Moldboard Sideshift - Right | 26 in (660.4 mm) |
| Moldboard Sideshift - Left | 20.1 in (510.6 mm) |
| Blade Tip Range - Forward | 40 degrees |
| Blade Tip Range - Backward | 5 degrees |
| Maximum Shoulder Reach Outside Of Tires - Right | 89.7 in (2278.4 mm) |
| Maximum Shoulder Reach Outside Of Tires - Left | 82.3 in (2090.5 mm) |
| Maximum Lift Above Ground | 17.8 in (452.2 mm) |
| Maximum Depth Of Cut | 29.5 in (749.3 mm) |
| Maximum Blade Position Angle | 90 degrees |
Scarifier
| Front, V-Type - Working Width | 47.4 in (1204 mm) |
| Rear - Scarifier Shank Holders | 9 |
| Mid, V-Type - Scarifier Shank Holders | 11 |
| Front, V-Type, 5 Or 11 Tooth - Working Width | 40.6 in (1031.3 mm) |
| Front, V-Type, 5 Or 11 Tooth - Scarifying Depth, Maximum | 18.4 in (467.4 mm) |
| Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holders | 5/11 |
| Front, V-Type, 5 Or 11 Tooth - Scarifier Shank Holder Spacing | 4.6 in (116.9 mm) |
| Mid, V-Type - Working Width | 46.6 in (1183.7 mm) |
| Mid, V-Type - Scarifying Depth, Maximum | 11.5 in (292.1 mm) |
| Mid, V-Type - Scarifier Shank Holder Spacing | 4.6 in (116.9 mm) |
| Rear - Working Width | 84 in (2133.6 mm) |
| Rear - Scarifying Depth, Maximum | 16.8 in (426.8 mm) |
| Rear - Scarifier Shank Holder Spacing | 10.5 in (266.7 mm) |
| Front, V-Type - Scarifying Depth, Maximum | 40.6 in (1031.3 mm) |
| Front, V-Type - Scarifier Shank Holders | 5/11 |
| Front, V-Type - Scarifier Shank Holder Spacing | 18.4 in (467.4 mm) |
| Mid, Straight - Working Width | 70.9 in (1800.9 mm) |
| Mid, Straight - Scarifier Shank Holder Spacing | 4.4 in (111.8 mm) |
| Mid, Straight - Scarifier Shank Holders | 17 |
| Mid, Straight - Scarifying Depth, Maximum | 12.5 in (317.5 mm) |
Tandems
| Height | 19.9 in (505.5 mm) |
| Width | 8.3 in (210.9 mm) |
| Sidewall Thickness - Inner | 0.7 in (16.1 mm) |
| Sidewall Thickness - Outer | 0.8 in (18.1 mm) |
| Drive Chain Pitch | 2 in (50.8 mm) |
| Wheel Axle Spacing | 60 in (1522.8 mm) |
| Tandem Oscillation - Front Up | 15 degrees |
| Tandem Oscillation - Front Down | 25 degrees |
