Komatsu GD675-5
Browse All Komatsu or Motor Grader Models
Contents:
Dimensions
| Overall Length | 34.7 ft in (10575 mm) |
| Width Over Tires | 8.63 ft in (2630 mm) |
| Wheelbase | 21.26 ft in (6480 mm) |
| Tandem Axle Wheelbase | 5.01 ft in (1525 mm) |
| Blade Base | 8.47 ft in (2580 mm) |
| Height To Top Of Isomount Cab | 10.5 ft in (3200 mm) |
Engine
| Torque | 694.1 lb ft (941 Nm) |
| Number Of Cylinders | 6 |
| Gross Power Gear 1-3 | 136 hp (101.5 kw) |
| Gross Power Gear 4-6 | 151 hp (112.7 kw) |
| Gross Power Gear 7-8 | 165 hp (123.1 kw) |
| Net Power Gear 1-3 | 134 hp (100 kw) |
| Net Power Gear 4-6 | 149 hp (111.2 kw) |
| Engine Make | KOMATSU |
| Engine Model | SAA6D107E-1 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1450 rpm |
| Net Power Gears 7-8 | 163 hp (121.6 kw) |
| Bore | 4.3 in (107 mm) |
| Stroke | 4.9 in (124 mm) |
| Aspiration | Turbocharged |
Operational
| Std Operation Weight - Front Axle | 9645.3 lb (4375 kg) |
| Std Operation Weight - Rear Axle | 25529.6 lb (11580 kg) |
| Hydraulic System Fluid Capacity | 18.3 gal (69 L) |
| Std Operation Weight - Total | 35174.8 lb (15955 kg) |
| Fuel Capacity | 109.9 gal (416 L) |
| Cooling System Fluid Capacity | 7.8 gal (29.4 L) |
| Transmission Fluid Capacity | 11.9 gal (45 L) |
| Rear Diff/Final Drive Fluid Capacity | 4.5 gal (17 L) |
| Circle Gearbox Fluid Capacity | 1.9 gal (7 L) |
| Tandem Case Fluid Capacity (Each) | 15.1 gal (57 L) |
| Tire Size | 17.5R25 |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 60 amps |
Steering
| Articulation Angle | 25 degrees |
| Turning Radius | 24.3 ft in (7.4 m) |
Transmission
| Transmission Type | Full power shift transmission |
| Number Of Gears - Forward | 8 |
| Number Of Gears - Reverse | 4 |
| Max Speed - Forward | 27.5 mph (44.3 km/h) |
| Max Speed - Reverse | 25 mph (40.3 km/h) |
Front Axle
| Wheel Lean | 16 degrees |
| Oscillation - Total | 32 degrees |
| Ground Clearance | 2.1 ft in (620 mm) |
Moldboard
| Moldboard Width | 14.2 ft in (4320 mm) |
| Moldboard Height | 25.4 in (645 mm) |
| Moldboard Thickness | 0.8 in (19 mm) |
| Max Depth Of Cut | 24.3 in (615 mm) |
| Side Shift Left | 44.3 in (1125 mm) |
| Side Shift Right | 44.3 in (1125 mm) |
Hydraulic System
| Pump Type | Load-sensing closed center hydraulics |
| Pump Flow | 52.9 gal/min (200 L/min) |
| Relief Valve Pressure | 435.2 psi (3000 kPa) |
Circle
| Diameter | 60.3 in (1530 mm) |
| Rotation | 360 degrees |
| Shift Left | 23.3 in (590 mm) |
| Shift Right | 23.3 in (590 mm) |
| Max Reach Outside Tires - Left | 98.5 in (2500 mm) |
| Max Reach Outside Tires - Right | 98.5 in (2500 mm) |
| Max Lift Above Ground | 18.9 in (480 mm) |
| Blade Tip Angle - Front | 40 degrees |
| Blade Tip Angle - Rear | 5 degrees |
