Caterpillar 226
Browse All Caterpillar or Skid Steer Loader Models
Contents:
Dimensions
| Length With Bucket | 10.61 ft in (3233 mm) |
| Width Over Tires | 6.01 ft in (1829 mm) |
| Ground Clearance | 8 in (203.2 mm) |
| Height To Top Of Cab | 6.4 ft in (1950 mm) |
| Wheelbase | 3.24 ft in (986 mm) |
| Length W/O Bucket | 8.27 ft in (2519 mm) |
| Clearance At Max Lift And Dump | 7.12 ft in (2169 mm) |
| Reach At Max Lift And Dump | 21.5 in (546 mm) |
| Wheel Base | 3.24 ft in (0.09 m) |
| Bucket Pin Height - Carry Position | 9 in (228.6 mm) |
| Clearance At Maximum Lift And Dump | 85 in (2159 mm) |
| Length - Without Bucket | 99 in (2514.6 mm) |
| Bucket Pin Height - Maximum Lift | 9.34 ft in (0.24 m) |
| Maximum Overall Height | 146 in (3708.4 mm) |
| Height - Top Of Cab | 6.42 ft in (0.17 m) |
| Bumper Overhang - Rear Axle | 38 in (965.2 mm) |
| Reach - Maximum Lift/Dump | 20 in (508 mm) |
| Turning Radius From Center - Inc Bucket | 79.38 in (2016 mm) |
| Length - With Bucket On Ground | 127 in (3225.8 mm) |
| Vehicle Width Over Tires | 60 in (1524 mm) |
Operating Specifications
| Breakout Force - Tilt Cylinder | 3903 lb (1770.38 kg) |
| Breakout Force - Lift Cylinder | 3136 lb (1422.47 kg) |
| Rated Operating Capacity | 1500 lb (680.39 kg) |
| Rated Operating Capacity With Optional Counterweight | 1600 lb (725.75 kg) |
| Tipping Load | 3000 lb (1360.78 kg) |
Engine
| Number Of Cylinders | 4 |
| Engine Make | 2236 |
| Engine Model | 3034 |
| Gross Power | 58 hp (43.3 kw) |
| Net Power | 55 hp (41.1 kw) |
| Power Measured @ | 2600 rpm |
| Displacement | 183 cu in (3 L) |
| Bore | 3.9 in (97.1 mm) |
| Stroke | 4 in (100.1 mm) |
| Engine Model | Cat 3034C |
| Net Flywheel Power | 41 hp (30.6 kw) |
Operational
| Operational Weight | 5830 lb (2644.5 kg) |
| Fuel Capacity | 15.9 gal (60 L) |
| Max Speed | 6.9 mph (11.1 km/h) |
| Hydraulic System Fluid Capacity | 14.6 gal (55 L) |
| Operating Speed | 6.9 mph (11.1 km/h) |
Loader
| Operating Load Rating | 1500 lb (680.4 kg) |
| Tipping Angle | 2710 degrees |
| Bucket Capacity | 0.5 yd3 (0.4 m3) |
Weights
| Operating Weight | 5645 lb (2560.6 kg) |
Hydraulic
| Pump Flow Capacity | 15.2 gal/min (57.2 L/min) |
Hydraulic System
| Loader Hydraulic Pressure | 3300 psi |
| Loader Hydraulic Flow | 15.1 gal/min |
| Hydraulic Flow | Standard flow |
Service Refill Capacities
| Cooling System | 2.6 gal (9.9 L) |
| Fuel Tank | 17 gal (64.4 L) |
| Hydraulic Tank | 9.2 gal (34.9 L) |
| Engine Crankcase | 2.4 gal (9.1 L) |
| Hydraulic System | 14.5 gal (54.9 L) |
| Chain Box - Each Side | 1.6 gal (6.1 L) |
Cab
| Rops | SAE J1040 MAY94 and ISO3471:1994 |
| Fops | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Fops Level Ii | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
