Caterpillar 248B
Browse All Caterpillar or Skid Steer Loader Models
Contents:
Dimensions
| Length With Bucket | 11.54 ft in (3515 mm) |
| Width Over Tires | 5.5 ft in (1676 mm) |
| Ground Clearance | 9 in (228.6 mm) |
| Height To Top Of Cab | 6.87 ft in (2092 mm) |
| Wheelbase | 3.73 ft in (1134 mm) |
| Length W/O Bucket | 9.19 ft in (2800 mm) |
| Clearance At Max Lift And Dump | 7.87 ft in (2398 mm) |
| Reach At Max Lift And Dump | 21.3 in (541 mm) |
| Maximum Overall Height | 156 in (3962.4 mm) |
| Maximum Reach - With Arms Parallel | 53 in (1346.2 mm) |
| Bucket Pin Height - Carry Position | 10 in (254 mm) |
| Bucket Pin Height - Maximum Lift | 10.17 ft in (0.26 m) |
| Bumper Overhang - Rear Axle | 41 in (1041.41 mm) |
| Clearance At Maximum Lift And Dump | 94 in (2387.6 mm) |
| Height - Top Of Cab | 6.84 ft in (0.18 m) |
| Length - With Bucket On Ground | 138 in (3505.2 mm) |
| Length - Without Bucket | 110 in (2794 mm) |
| Turn Radius From Center - Rear | 64 in (1625.6 mm) |
| Turning Radius From Center - Inc Bucket | 82.56 in (2097 mm) |
| Turning Radius From Center - Machine Rear | 63.9 in (1623 mm) |
| Vehicle Width Over Tires | 66 in (1676.4 mm) |
| Wheel Base | 3.75 ft in (0.1 m) |
| Reach - Maximum Lift/Dump | 21 in (533.4 mm) |
| Turn Radius From Center - Bucket | 83 in (2108.2 mm) |
| Turn Radius From Center - Coupler | 52 in (1320.8 mm) |
Operating Specifications
| Rated Operating Capacity With Optional Counterweight | 2100 lb (952.55 kg) |
| Breakout Force - Lift Cylinder | 4592.22 lb (2083 kg) |
| Rated Operating Capacity | 2000 lb (907.19 kg) |
| Tipping Load | 4188 lb (1899.65 kg) |
| Breakout Force - Tilt Cylinder | 5484 lb (2487.51 kg) |
Engine
| Engine Make | 2236 |
| Engine Model | 3044C DIT |
| Gross Power | 82 hp (61.2 kw) |
| Net Power | 76.5 hp (57 kw) |
| Aspiration | turbocharged |
| Bore | 3.7 in (94 mm) |
| Stroke | 4.7 in (119.4 mm) |
| Gross Power - Sae J1995 | 82 hp (61.2 kw) |
| Engine Model | Cat 3044C DIT |
| Engine Power - Iso 14396 | 80 hp (59.7 kw) |
| Net Power - Eec 80/1269 | 77 hp (57.5 kw) |
| Net Power - Iso 9249 Eec | 77 hp (57.5 kw) |
| Net Power - Sae 1349 | 76 hp (56.7 kw) |
| Net Flywheel Power | 76 hp (56.7 kw) |
Operational
| Operational Weight | 7319.4 lb (3320 kg) |
| Fuel Capacity | 23.8 gal (90 L) |
| Cooling System Fluid Capacity | 2.7 gal (10 L) |
| Engine Oil Fluid Capacity | 2.7 gal (10 L) |
| Hydraulic System Fluid Capacity | 13.8 gal (52 L) |
| Max Speed | 7.8 mph (12.5 km/h) |
| Chain Box Fluid Capacity - Each Side | 1.9 gal (7 L) |
| Tire Size | 12x16.5 10PR |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 90 amps |
Power Train
| Travel Speed Forward | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse | 7.7 mph (12.4 km/h) |
| Travel Speed Reverse - 2-Speed Option | 11.8 mph (19 km/h) |
| Travel Speed Forward - 2-Speed Option | 11.8 mph (19 km/h) |
Loader
| Breakout Force | 5482.9 lb (2487 kg) |
| Operating Load Rating | 1999.6 lb (907 kg) |
| Tipping Angle | 3999.2 degrees |
Weights
| Operating Weight | 7321 lb (3320.8 kg) |
Hydraulic
| Pump Flow Capacity | 33.1 gal/min (125 L/min) |
| Relief Valve Pressure | 4061.1 psi (28000 kPa) |
Hydraulic System
| Hydraulic Power | 78.2 hp (58.3 kw) |
| Maximum Loader Hydraulic Flow | 33 gal/min |
| Maximum Loader Hydraulic Pressure | 4060 psi |
| Loader Hydraulic Pressure | 4061.06 psi |
| Loader Hydraulic Flow | 33.02 gal/min |
| Hydraulic Flow | High Flow XPS |
Service Refill Capacities
| Cooling System | 2.6 gal (9.9 L) |
| Fuel Tank | 23.8 gal (90.1 L) |
| Hydraulic Tank | 9.2 gal (34.9 L) |
| Engine Crankcase | 2.6 gal (9.9 L) |
| Hydraulic System | 13.7 gal (51.9 L) |
| Chain Box - Each Side | 1.8 gal (6.9 L) |
Cab
| Rops | SAE J1040 MAY94 and ISO3471:1994 |
| Fops | SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
| Fops Level Ii | SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional) |
