Liebherr L542
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.1 ft in (2468.88 mm) |
| Arm Length | 8.2 ft in (2499.36 mm) |
| Breakout Force | 24054.56 lb (107 kN) |
| Bucket Capacity - Heaped | 3.7 yd3 (2.83 m3) |
| Bucket Width | 8.2 ft in (2499.36 mm) |
| Digging Depth | 2 ft in (609.6 mm) |
Dimensions
| Ground Clearance | 1.7 ft in (518.16 mm) |
| Length With Bucket On Ground | 24.1 ft in (7345.68 mm) |
| Height To Top Of Cab | 10.8 ft in (3291.84 mm) |
| Wheelbase | 9.9 ft in (3017.52 mm) |
| Hinge Pin - Max Height | 12.9 ft in (3931.92 mm) |
| Reach At Max Lift And Dump | 3.8 ft in (1158.24 mm) |
Electrical System
| Alternator | 24/100 (V/A) |
| Voltage | 24 V V (deletedelete) |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 135 Ah |
Engine
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 4 |
| Engine Model | 4045HFL93 |
| Air Cleaner | Dry air filter with main and safety element, pre-cleaner, service indicator on the display |
| Gross Power | 161 hp (120.1 kw) |
| Power Measured @ | 2000 rpm |
| Max Torque | 476 lb ft |
| Displacement | 275 cu in (4.6 L) |
| Torque Measured @ | 1600 rpm |
| Aspiration | Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter |
| Bore | 4.2 in (106.7 mm) |
| Stroke | 5 in (127 mm) |
Operational
| Operating Weight | 29540 lb (13399.2 kg) |
| Fuel Capacity | 54.2 gal (205.2 L) |
| Hydraulic System Fluid Capacity | 47.6 gal (180.2 L) |
| Engine Oil Fluid Capacity | 5.4 gal (20.5 L) |
| Cooling System Fluid Capacity | 10 gal (37.9 L) |
| Hydraulic Fluid Capacity | 29 gal (109.8 L) |
| Transmission Fluid Capacity | 1 gal (3.8 L) |
| Front Axle/Diff Fluid Capacity | 4.3 gal (16.3 L) |
| Rear Axle/Diff Fluid Capacity | 4 gal (15.2 L) |
| Static Tipping Weight | 22485 lb (10199.1 kg) |
| Turning Radius | 20.2 ft in (6157 mm) |
| Tire Size | 20.5R25 L3 |
Transmission
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.9 mph (40.1 km/h) |
| Max Speed - Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
| Max Operating Pressure | 5076 psi |
| Relief Valve Setting | 4351.2 psi (30000 kPa) |
| Pump Flow Capacity | 45 gal/min (170.4 L/min) |
| Raise Time | 5.3 sec |
| Dump Time | 1.6 sec |
| Lower Time | 4 sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
