Zettelmeyer ZL602
Browse All Zettelmeyer or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.11 ft in (2470 mm) |
| Bucket Capacity - Heaped | 1.05 yd3 (0.8 m3) |
| Bucket Width | 5.75 ft in (1750 mm) |
| Breakout Force | 9104.77 lb (40.5 kN) |
Dimensions
| Ground Clearance | 1.58 ft in (480 mm) |
| Length With Bucket On Ground | 16.9 ft in (5150 mm) |
| Width Over Tires | 5.68 ft in (1730 mm) |
| Height To Top Of Cab | 8.58 ft in (2615 mm) |
| Wheelbase | 6.57 ft in (2000 mm) |
| Hinge Pin - Max Height | 10.24 ft in (3120 mm) |
| Reach At Max Lift And Dump | 2.33 ft in (710 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Model | KHD BF4 L 1011T |
| Net Power | 57 hp (42.5 kw) |
| Gross Power | 59.7 hp (44.5 kw) |
| Power Measured @ | 2300 rpm |
| Max Torque | 147.6 lb ft (200 Nm) |
| Displacement | 167 cu in (2.8 L) |
| Torque Measured @ | 1800 rpm |
| Aspiration | turbo + oil/air cooled |
Operational
| Operating Weight | 10141 lb (4599.9 kg) |
| Fuel Capacity | 15.9 gal (60 L) |
| Hydraulic System Fluid Capacity | 15.9 gal (60 L) |
| Engine Oil Fluid Capacity | 2.8 gal (10.5 L) |
| Front Axle/Diff Fluid Capacity | 2.7 gal (10 L) |
| Rear Axle/Diff Fluid Capacity | 3 gal (11 L) |
| Static Tipping Weight | 7738.3 lb (3510 kg) |
| Turning Radius | 13.5 ft in (4090 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 60 amps |
| Rear Axle Oscillation | 20 degrees |
| Tire Size | 12.5-20 |
Transmission
| Transmission Type | hydrostatic full power shift |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12.5 mph (20 km/h) |
| Max Speed - Reverse | 12.5 mph (20 km/h) |
Hydraulic System
| Relief Valve Setting | 3190.9 psi (22000 kPa) |
| Pump Flow Capacity | 13.3 gal/min (50 L/min) |
| Raise Time | 6 sec |
| Dump Time | 1 sec |
| Lower Time | 3 sec |
| Pump Type | gear type |
