New Holland C238
Browse All New Holland or Skid Steer Loader Models
Contents:
Dimensions
| Ground Clearance | 9.57 in (243 mm) |
| Bottom Of Level Bucket, Fully Raised | 124.22 in (3155 mm) |
| Bucket Hinge Pin | 131.11 in (3330 mm) |
| Clearance Circle Rear | 71.23 in (1809 mm) |
| Clearance Circle Without Bucke | 56.23 in (1428 mm) |
| Dump Reach - General Purpose | 34.45 in (875 mm) |
| Ground Pressure | 4.6 psi (31.72 kPa) |
| Overall Width | 76 in (1930.4 mm) |
| Rollback, Bucket At Full Height | 84.8 degrees |
| Rollback, Bucket On Ground | 32.8 degrees |
| Top Of Rops | 80.44 in (2043 mm) |
| Angle Of Departure | 32 degrees |
| Track On Ground | 64.53 in (1639 mm) |
Engine
| Horsepower, Net-Sae J1349 | 84 hp (62.7 kw) |
| Fuel Injection | HPCR Direct |
| Horsepower Per Sae J1349 Gross | 90 hp (67.2 kw) |
| Engine Model | F5BFL413E*B002 |
| Max Torque | 282 lb ft (382.4 Nm) |
| Torque Measured @ | 1400 rpm |
| Displacement | 207.5 cu in (3.4 L) |
| Bore | 3.9 in (99 mm) |
| Stroke | 4.4 in (110 mm) |
Capacities
| Engine Oil W/ Filter Change | 2.3 gal (8.5 L) |
| Fuel Tank | 25.5 gal (96.5 L) |
| System Capacity With Filter | 11.8 gal (44.5 L) |
Performance
| Rated Operating Load, 35% Tip | 2665.4 lb (1209 kg) |
| Tipping Load | 7599.4 lb (3447 kg) |
| Operating Weight | 10099.4 lb (4581 kg) |
| Breakout Force, Bucket Cylinder | 7351.3 lb (32.7 kN) |
| Breakout Force, Lift Cylinder | 6114.9 lb (27.2 kN) |
| Rated Operating Load, 50% Tip | 3798.6 lb (1723 kg) |
Power Train
| Travel Speed, Low Range | 5.1 mph (8.2 km/h) |
| Travel Speed, High Range | 7.6 mph (12.2 km/h) |
Hydraulic System
| Optional High Flow | 37.6 gal/min (142.4 L/min) |
| Relief Valve Pressure | 3046 psi (21001.5 kPa) |
| Pump Flow | 24.2 gal/min (91.7 L/min) |
