Liebherr L566
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.8 ft in (3291.84 mm) |
| Arm Length | 9.7 ft in (2956.56 mm) |
| Breakout Force | 44959.54 lb (199.99 kN) |
| Bucket Capacity - Heaped | 5.2 yd3 (3.98 m3) |
| Bucket Width | 9.1 ft in (2773.68 mm) |
| Digging Depth | 4 ft in (1219.2 mm) |
Dimensions
| Ground Clearance | 1.9 ft in (579.12 mm) |
| Length With Bucket On Ground | 30.5 ft in (9296.4 mm) |
| Height To Top Of Cab | 11.9 ft in (3627.12 mm) |
| Wheelbase | 12.5 ft in (3810 mm) |
| Hinge Pin - Max Height | 14.4 ft in (4389.12 mm) |
| Reach At Max Lift And Dump | 3.1 ft in (944.88 mm) |
Electrical System
| Alternator | 28/100 (V/A) |
| Voltage | 24 V V (deletedelete) |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 180 Ah |
Engine
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 4 |
| Engine Model | D936 A7 |
| Air Cleaner | Dry air filter with main and safety element, pre-cleaner, service indicator on the display |
| Gross Power | 255 hp (190.2 kw) |
| Power Measured @ | 1300 rpm |
| Max Torque | 1033 lb ft |
| Displacement | 642 cu in (10.6 L) |
| Torque Measured @ | 1300 rpm |
| Aspiration | Water-cooled with exhaust turbo charging, externally cooled exhaust gas recirculation and diesel particulate filter |
| Bore | 4.8 in (122 mm) |
| Stroke | 6 in (150.2 mm) |
Operational
| Operating Weight | 51035 lb (23149.1 kg) |
| Fuel Capacity | 106 gal (401.3 L) |
| Hydraulic System Fluid Capacity | 70 gal (265 L) |
| Engine Oil Fluid Capacity | 11.6 gal (44 L) |
| Cooling System Fluid Capacity | 13.7 gal (51.9 L) |
| Hydraulic Fluid Capacity | 35.7 gal (135.2 L) |
| Transmission Fluid Capacity | 3 gal (11.4 L) |
| Front Axle/Diff Fluid Capacity | 11.1 gal (42.1 L) |
| Rear Axle/Diff Fluid Capacity | 10.6 gal (40.2 L) |
| Static Tipping Weight | 34720 lb (15748.8 kg) |
| Turning Radius | 21.3 ft in (6492.3 mm) |
| Tire Size | 23.5R25 L3 |
Transmission
| Number Of Forward Gears | 3 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 24.9 mph (40.1 km/h) |
| Max Speed - Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
| Max Operating Pressure | 5076 psi |
| Relief Valve Setting | 4351.2 psi (30000 kPa) |
| Pump Flow Capacity | 77 gal/min (291.5 L/min) |
| Raise Time | 5.5 sec |
| Dump Time | 3 sec |
| Lower Time | 3.5 sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
