Liebherr L566 XPOWER
Browse All Liebherr or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.6 ft in (3230.88 mm) |
| Arm Length | 9.7 ft in (2956.56 mm) |
| Breakout Force | 44959.54 lb (199.99 kN) |
| Bucket Capacity - Heaped | 5.5 yd3 (4.21 m3) |
| Bucket Width | 9.1 ft in (2773.68 mm) |
| Digging Depth | 4 ft in (1219.2 mm) |
Dimensions
| Ground Clearance | 1.9 ft in (579.12 mm) |
| Length With Bucket On Ground | 30.1 ft in (9174.48 mm) |
| Height To Top Of Cab | 11.9 ft in (3627.12 mm) |
| Wheelbase | 11.8 ft in (3596.64 mm) |
| Hinge Pin - Max Height | 14.4 ft in (4389.12 mm) |
| Reach At Max Lift And Dump | 3.11 ft in (947.93 mm) |
Electrical System
| Alternator | 28/180 (V/A) |
| Voltage | 24 V V (deletedelete) |
| Starter | 24/10.5 (V/HP) |
| Battery | 2 x 180 Ah |
Engine
| Fuel Injection | Electronic Common Rail high-pressure injection |
| Number Of Cylinders | 6 |
| Engine Model | D936 A7 |
| Net Power | 268 hp (199.9 kw) |
| Air Cleaner | Dry type filter with main and safety element, pre-cleaner, service indicator on the Liebherr display |
| Gross Power | 272 hp (202.9 kw) |
| Power Measured @ | 1800 rpm |
| Max Torque | 1409 lb ft |
| Displacement | 642 cu in (10.6 L) |
| Torque Measured @ | 1100 rpm |
| Aspiration | Water-cooled in-line engine with charge-air cooling, exhaust after-treatment through Liebherr-SCR technology |
| Bore | 4.8 in (122 mm) |
| Stroke | 6 in (150.2 mm) |
Operational
| Operating Weight | 52690 lb (23899.8 kg) |
| Fuel Capacity | 96 gal (363.4 L) |
| Hydraulic System Fluid Capacity | 50.2 gal (190.1 L) |
| Engine Oil Fluid Capacity | 10.6 gal (40.2 L) |
| Cooling System Fluid Capacity | 19.3 gal (73.1 L) |
| Hydraulic Fluid Capacity | 27.7 gal (104.9 L) |
| Front Axle/Diff Fluid Capacity | 11.1 gal (42.1 L) |
| Rear Axle/Diff Fluid Capacity | 11.1 gal (42.1 L) |
| Static Tipping Weight | 35055 lb (15900.7 kg) |
| Turning Radius | 24.1 ft in (7345.7 mm) |
| Tire Size | 26.5R25 L3 |
Transmission
| Max Speed - Forward | 24.9 mph (40.1 km/h) |
| Max Speed - Reverse | 24.9 mph (40.1 km/h) |
Hydraulic System
| Max Operating Pressure | 5076 psi |
| Relief Valve Setting | 4351.2 psi (30000 kPa) |
| Pump Flow Capacity | 77 gal/min (291.5 L/min) |
| Raise Time | 5.5 sec |
| Dump Time | 2 sec |
| Lower Time | 3.5 sec |
| Pump Type | “Load-sensing” variable axial piston pump with output and flow control, and pressure cut-off in the control block |
