Zettelmeyer ZL502
Browse All Zettelmeyer or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 8.21 ft in (2500 mm) |
| Bucket Capacity - Heaped | 0.86 yd3 (0.65 m3) |
| Bucket Capacity - Struck | 0.69 yd3 (0.52 m3) |
| Bucket Width | 5.75 ft in (1750 mm) |
| Breakout Force | 8992.36 lb (40 kN) |
Dimensions
| Ground Clearance | 1.48 ft in (450 mm) |
| Length With Bucket On Ground | 16.72 ft in (5095 mm) |
| Width Over Tires | 5.64 ft in (1717 mm) |
| Height To Top Of Cab | 8.49 ft in (2585 mm) |
| Wheelbase | 6.57 ft in (2000 mm) |
| Hinge Pin - Max Height | 10.14 ft in (3090 mm) |
| Reach At Max Lift And Dump | 2.43 ft in (740 mm) |
Engine
| Number Of Cylinders | 4 |
| Engine Model | KHD F 4L 1011 |
| Net Power | 47 hp (35 kw) |
| Gross Power | 48.3 hp (36 kw) |
| Power Measured @ | 2800 rpm |
| Max Torque | 87.1 lb ft (118 Nm) |
| Displacement | 166.8 cu in (2.8 L) |
| Torque Measured @ | 1600 rpm |
| Aspiration | direct |
Operational
| Operating Weight | 9259.5 lb (4200 kg) |
| Fuel Capacity | 15.9 gal (60 L) |
| Hydraulic System Fluid Capacity | 15.9 gal (60 L) |
| Engine Oil Fluid Capacity | 2.8 gal (10.5 L) |
| Front Axle/Diff Fluid Capacity | 2.7 gal (10 L) |
| Rear Axle/Diff Fluid Capacity | 3 gal (11 L) |
| Static Tipping Weight | 6724.1 lb (3050 kg) |
| Turning Radius | 13.4 ft in (4060 mm) |
| Operating Voltage | 12 V |
| Alternator Supplied Amperage | 60 amps |
| Rear Axle Oscillation | 20 degrees |
| Tire Size | 12.5-18 |
Transmission
| Transmission Type | hydrostatic |
| Number Of Forward Gears | 2 |
| Number Of Reverse Gears | 2 |
| Max Speed - Forward | 12.5 mph (20 km/h) |
| Max Speed - Reverse | 12.5 mph (20 km/h) |
Hydraulic System
| Relief Valve Setting | 3000 psi (20684.3 kPa) |
| Pump Flow Capacity | 11.9 gal/min (45 L/min) |
| Raise Time | 6 sec |
| Dump Time | 1 sec |
| Lower Time | 3 sec |
| Pump Type | gear type tandem |
