Kawasaki 95ZIII
Browse All Kawasaki or Wheel Loader Models
Contents:
Bucket
| Dump Clearance At Max Raise | 10.5 ft in (3200 mm) |
| Bucket Capacity - Heaped | 6.41 yd3 (4.91 m3) |
| Bucket Capacity - Struck | 5.5 yd3 (4.2 m3) |
| Bucket Width | 11.32 ft in (3450 mm) |
| Breakout Force | 5348204.3 lb (23790 kN) |
Dimensions
| Ground Clearance | 1.61 ft in (490 mm) |
| Length With Bucket On Ground | 29.38 ft in (8955 mm) |
| Width Over Tires | 10.47 ft in (3190 mm) |
| Height To Top Of Cab | 12.67 ft in (3860 mm) |
| Wheelbase | 11.68 ft in (3560 mm) |
| Hinge Pin - Max Height | 14.67 ft in (4470 mm) |
| Reach At Max Lift And Dump | 4.45 ft in (1355 mm) |
Engine
| Number Of Cylinders | 6 |
| Engine Make | 2347 |
| Engine Model | NTA-855-C 335 |
| Net Power | 310 hp (231.2 kw) |
| Power Measured @ | 2100 rpm |
| Max Torque | 1005 lb ft (1362.6 Nm) |
| Displacement | 855 cu in (14.1 L) |
| Torque Measured @ | 1400 rpm |
| Aspiration | turbocharged & air cooled |
Operational
| Operating Weight | 62401.9 lb (28305 kg) |
| Fuel Capacity | 107 gal (405 L) |
| Hydraulic System Fluid Capacity | 108.4 gal (410 L) |
| Engine Oil Fluid Capacity | 11.4 gal (43 L) |
| Cooling System Fluid Capacity | 22.5 gal (85 L) |
| Transmission Fluid Capacity | 17.2 gal (65 L) |
| Front Axle/Diff Fluid Capacity | 26.5 gal (100 L) |
| Rear Axle/Diff Fluid Capacity | 26.5 gal (100 L) |
| Static Tipping Weight | 44577.5 lb (20220 kg) |
| Turning Radius | 23.9 ft in (7275 mm) |
| Operating Voltage | 24 V |
| Alternator Supplied Amperage | 75 amps |
| Rear Axle Oscillation | 26 degrees |
| Tire Size | 29.5-25-22PR (L3) |
Transmission
| Transmission Type | full power shift |
| Number Of Forward Gears | 4 |
| Number Of Reverse Gears | 3 |
| Max Speed - Forward | 22.7 mph (36.6 km/h) |
| Max Speed - Reverse | 15.1 mph (24.4 km/h) |
Hydraulic System
| Relief Valve Setting | 3000 psi (20684.3 kPa) |
| Pump Flow Capacity | 50 gal/min (189.3 L/min) |
| Raise Time | 7.3 sec |
| Dump Time | 1.7 sec |
| Lower Time | 3.5 sec |
| Pump Type | gear type |
